Oandy
New Bee
- Joined
- Aug 28, 2009
- Messages
- 88
- Reaction score
- 1
- Location
- Easton solway firth
- Hive Type
- 14x12
- Number of Hives
- 4
Hi i am fed up with transporting Tubs or Buckets with lids to clean Hive Tools. So i have made a tube from Waste pipe (the type that carries the water from sinks) to carry cleaning fluid i place Hive Tool in tube with Soda Crystals and a drop of Washing Up Liquid and warm Water (not boiling Water as it builds up Preasure and may blow the top off) Please only use 50mm Waste pipe as 32mm and 40mm are to small.Items needed. need 1--50mm waste pipe
2- 2x 50mm straight coupling
3- 2x 50mm access cap
4- Solvent weld
5- super glue
Cut Waste Pipe 60mm smaller than Hive Tool length. Solvent Weld straight couplings to pipe. Solvent Weld access cap to straight coupling. I also Solvent welded one end cap to the access body. Then the end that you are going to use,super glue the rubber O ring into rebate. If you want some thing bigger then use 110mm soil pipe and fittings Hope this Helps. Andy.
2- 2x 50mm straight coupling
3- 2x 50mm access cap
4- Solvent weld
5- super glue
Cut Waste Pipe 60mm smaller than Hive Tool length. Solvent Weld straight couplings to pipe. Solvent Weld access cap to straight coupling. I also Solvent welded one end cap to the access body. Then the end that you are going to use,super glue the rubber O ring into rebate. If you want some thing bigger then use 110mm soil pipe and fittings Hope this Helps. Andy.
Last edited: