Mask for oxalic vapour?

Beekeeping & Apiculture Forum

Help Support Beekeeping & Apiculture Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Smudger55

House Bee
Joined
Jan 3, 2016
Messages
111
Reaction score
3
Location
Ammanford
Hive Type
National
Number of Hives
2
What type of mask is needed for oxalic vapourizing?.... ๐Ÿ˜€๐Ÿ
 
Just put a clear plastic carrier bag over your head and tie it with some string around your neck, that is guaranteed to stop anything getting inhaled..:spy:

An elastic band is better - or to make absolutely sure, use a sturdy cable tie
 
An elastic band is better - or to make absolutely sure, use a sturdy cable tie
I was working on a onshore rig yard many moons ago and i was talking to someone while leaning on a handrail on the mezz deck, anyway some clown workmate snook a tie wrap around the handrail and my finger and pulled it tight, the thing was about 15mm wide and 2ft long, what a job we had to get it off, my finger swelled up and went purple, what a job to get it of needless to say that idiot got put on nights with the old timers instead of getting stretched.. lol.
 

This looks great and very safe - trouble is manufacturer says to replace after 28 days or when damaged. At over ยฃ30 a pop this seems like overkill.
The manufacturers of Api-bioxal (boo, hiss) recommend FFP2 protection so something like the Mask Pro 3L which is FFP3 rated (higher) and about ยฃ18 for 10, should do the trick.
I think the common sense approach is to exercise caution and act like you have no mask on, so ...
stand up wind,
be extra careful when taking the vaporizer out,
don't take risks.​
Then you have the mask as back up 'just in case'.
Don't forget you will need eye protection as well.

No doubt others will disagree:spy:
 
I'm pleased with this JSP mask from screwfix. Choice if filters, I went for the A2P3 which include protection against organic vapours & particles.
Easy to check if you have a secure seal against your face.

image.jpg
 
I'm pleased with this JSP mask from screwfix. Choice if filters, I went for the A2P3 which include protection against organic vapours & particles.
Easy to check if you have a secure seal against your face.

View attachment 13813

Can you get your bee suit on wearing all that pa lava.
 
Sundstrom sr100 about ยฃ25, replacement filters ยฃ5 (easily fits under a bee suit) Don't bother with paper/disposable masks, the filter might be p3 rated but the gaps around your nose and mouth won't be!
(15 years in the asbestos industry)
 
Responders should have at least practised what they preach. It might make the place safer for the dimwits who might follow the advice.
 
Responders should have at least practised what they preach. It might make the place safer for the dimwits who might follow the advice.
:hairpull::hairpull::hairpull:
That seems to go for a lot of the " advice"... even in the cut and paste bee books that weigh down my bookcase!

Yeghes da
 
Famous last words. 6 out of 7 hives were really quiet, but the seventh came out en masse. It was cold and I was suited. Learnt too many times about " not bothering to dress up"
 
What type of mask is needed for oxalic vapourizing?.... ๐Ÿ˜€๐Ÿ

As I've posted previously: I do not use a mask. I have a 15m heavy duty truck jump-lead from my car battery to the vapouriser (2m) = 17m. It takes at least 90 seconds for 'smoke' to appear from cracks in the hive by which time I'm at least 20m away upwind. I've never had the slightest sensation of inhaling the vapour.
I usually allow 5 minutes (no residue crystals remain) then withdraw the instrument and immediately plunge it into cold water.
 

Latest posts

Back
Top