Paynes Poly Nuc Vaporizing Tray

[Millet]

I have been playing about again and this is the result ... i have been thinking of a way to gas the 6 frame poly Nucs with Oxcalic Acid without melting things and this is what i have come up with.. the bed that the heating pan sits on is plaster board which is fire proof so no problem with burning that... the channel in the middle makes sure the gasser does not wander anywhere (the thick power leads have a mind of there own) .. so basically the vapors will travel up through the open mesh floor where i want them to go...

 

[yeogi75]

good job ideal if you have a few of them, put tray in one position shut entrance and carry over to tray

 

[G4WIL]

I have been playing about again and this is the result ... i have been thinking of a way to gas the 6 frame poly Nucs with Oxcalic Acid without melting things and this is what i have come up with.. the bed that the heating pan sits on is plaster board which is fire proof so no problem with burning that... the channel in the middle makes sure the gasser does not wander anywhere (the thick power leads have a mind of there own) .. so basically the vapors will travel up through the open mesh floor where i want them to go...

The vape tray is A symmetrical!
Obviously for a reason ?


Sent from my iPad using Tapatalk

 

[jenkinsbrynmair]

The vape tray is A symmetrical!
Obviously for a reason ?


Sent from my iPad using Tapatalk

Because the Payne's polynuc OMF is asymetrical.

I use this for my Maisies polynucs - just set it up on a convenient hive roof or the metal tray I insert for full size hives, close up the nucs and move them over on to it

 

[Beefriendly]

It's very obvious why its offset if you have a Paynes poly nuc....they are asymmetrical with a feed chamber on one side.

 

[Angry_Mob]

I've been meaning to make something up for OAV, might try something slightly different.

 

[G4WIL]

It's very obvious why its offset if you have a Paynes poly nuc....they are asymmetrical with a feed chamber on one side.

I don’t have a Payne’s poly nuc !
Chill out ! The question wasn’t directed at you in the first place !
Find a dog to kick !


Sent from my iPad using Tapatalk

 

[G4WIL]

Because the Payne's polynuc OMF is asymetrical.



I use this for my Maisies polynucs - just set it up on a convenient hive roof or the metal tray I insert for full size hives, close up the nucs and move them over on to it

Do you find that vapour introduced below the open mesh floor is as effective as above ?


Sent from my iPad using Tapatalk

 

[Beefriendly]

I don’t have a Payne’s poly nuc !
Chill out ! The question wasn’t directed at you in the first place !
Find a dog to kick !


Sent from my iPad using Tapatalk

I answered your question....what on earth's your problem? Wrong time of the month for you?
In future I'll shall tell you go and play with yourself if this is how you respond to help.

 

[Millet]

The vape tray is A symmetrical!
Obviously for a reason ?


Sent from my iPad using Tapatalk

Please explain as i don't have a clue what you mean.

 

[Millet]

Do you find that vapour introduced below the open mesh floor is as effective as above ?


Sent from my iPad using Tapatalk

Yes and you have no chance of frying the Queen.

 

[Erichalfbee]

Do you find that vapour introduced below the open mesh floor is as effective as above ?


Sent from my iPad using Tapatalk

I started thinking it might not be as there was always lots of residue underneath so I bought a sublimox to vape through a hole in the back of the floor above the omf

 

[G4WIL]

Yes and you have no chance of frying the Queen.

I have tried both ways but. Always concerned when deploying same over the omf!
It is obviously the safer option. [emoji846]


Sent from my iPad using Tapatalk

 

[Angry_Mob]

please explain as i don't have a clue what you mean.

 

[G4WIL]

I answered your question....what on earth's your problem? Wrong time of the month for you?
In future I'll shall tell you go and play with yourself if this is how you respond to help.

Change either your attitude or user name ! They are incompatible !



Sent from my iPad using Tapatalk

 

[Beefriendly]

Change either your attitude or user name ! They are incompatible !

My attitude!!!!
I was being helpful and answered your question explaining there was an additional feeder on one side and you start throwing a hissy fit.
Go play with yourself pond life.

Now added to my ignore list.

 

[Millet]

View attachment 15905

Thank you for that but it means absolutely nothing to me... the contraption i have rigged up will work well.. i put this post up in the hope it will help folk.. we now have side line comments which i am being patient with.

 

[G4WIL]

My attitude!!!!
I was being helpful and answered your question explaining there was an additional feeder on one side and you start throwing a hissy fit.
Go play with yourself pond life.

Now added to my ignore list.

Your answer was provocative . It started with a question “ if you have a Payne’s Poly nuc etc. You would know “ .
Then you resorted to sexist insults which I’m sure the ladies reading you posts would be well pleased with !
You’re last retort again relying on your base instincts !
As I said ! Change your user name !
I could suggest one but don’t intend lowering myself to your level of discourse !


Sent from my iPad using Tapatalk

 

[Millet]

Your answer was provocative . It started with a question “ if you have a Payne’s Poly nuc etc. You would know “ .
Then you resorted to sexist insults which I’m sure the ladies reading you posts would be well pleased with !
You’re last retort again relying on your base instincts !
As I said ! Change your user name !
I could suggest one but don’t intend lowering myself to your level of discourse !


Sent from my iPad using Tapatalk

It might be good if you go to bed and ignore this thread..

 

[G4WIL]

It might be good if you go to bed and ignore this thread..

Happen [emoji6]
The friendly beekeeper can no longer see my posts and visa versa . So peace is restored ! [emoji1]


Sent from my iPad using Tapatalk