nice one ,but the board was closed prior to inspection !
I wanted to add, If the hive was leaning forwards a bit you probably won't get it.It's just a bit of condensation that has dribbled through the debris on the mesh floor ... I see it now and again. Nothing to be concerned about.
With mine it tends to be at the back of the inspection board...I think in my poly hives excess condensation collects on the rear (north facing) wall of the hive and it runs down, through the OMF at the rear of the hive where there is always a bit of hive debris and it leaves a little puddle of brown water on the board. Obviously with a solid floor you would not see it ... as I said originally...no big deal.with an OMF?
The inspection tray looks like painted ply to me, I agree, a lean would help stop the pooling but far easier would be to remove it.I wanted to add, If the hive was leaning forwards a bit you probably won't get it.
True Steve.The inspection tray looks like painted ply to me, I agree, a lean would help stop the pooling but far easier would be to remove it.
Enter your email address to join: