What did you do in the 'workshop' today

[Parsonage Bees]

Looks interesting. I presume the outer sheath isn't live?

Pretty sure, Not going to try it.

 

[Sutty]

Pretty sure, Not going to try it.

Not got a meter?

 

[JamezF]

Oh, go on... Lick it and see

James

 

[Penninetrader]

It cuts 5.5mm hardwood ply quite easily. That's as thick as I've tried so far. I'm told by someone who has done a bit more experimentation that it will cut 18mm solid softwood too, and even the likes of solid 18mm oak or walnut if you take a couple of passes at it. The tricky bit is balancing the speed and power of the cut to avoid excessive charring.

James

That does sound interesting

 

[Richard]

It cuts 5.5mm hardwood ply quite easily. That's as thick as I've tried so far. I'm told by someone who has done a bit more experimentation that it will cut 18mm solid softwood too, and even the likes of solid 18mm oak or walnut if you take a couple of passes at it. The tricky bit is balancing the speed and power of the cut to avoid excessive charring.

James

Have you got air assist? I found with my low power laser when I was cutting thin ply (with many passes) it was much less charred when I botched up a jet of air pointing at the cutting point. (I say botched as I used a cheep airbrush compressor and the nozzle from a 3D printer to give a fine jet of air).

 

[Sutty]

Makes me wonder what a flow of argon around the cutting point (like tig welding) would do, preventing oxidation.

 

[JamezF]

Have you got air assist? I found with my low power laser when I was cutting thin ply (with many passes) it was much less charred when I botched up a jet of air pointing at the cutting point. (I say botched as I used a cheep airbrush compressor and the nozzle from a 3D printer to give a fine jet of air).

I have, yes, and it certainly does help. I've read suggestions however that some of the commercially-available air assist systems really don't move enough air even so. I saw one person who had connected up their compressor and was feeding air at 20 psi to the laser unit. I just need more practice first though. Once I've got things as good as I feel I can get them, then I'll worry about that sort of stuff.

James

 

[Newbeeneil]

Made up a new roof for my “Honey For Sale” advertising WBC as the ply has delaminated under the steel roof.
The new roof is deeper to allow inclusion of my second camera which should give a better view of my honey shelves.

 

[Sutty]

I have, yes, and it certainly does help. I've read suggestions however that some of the commercially-available air assist systems really don't move enough air even so. I saw one person who had connected up their compressor and was feeding air at 20 psi to the laser unit. I just need more practice first though. Once I've got things as good as I feel I can get them, then I'll worry about that sort of stuff.

James

I presume the laser is in a closed unit with interlocks you prevent firing it when it is open?*
I occasionally work around medical lasers and there are lots of precautions, sometimes excessively so based on the evidence.
Do you know what wavelength in operates at?

*though being able to cut branches off at a height (beware aircraft) or take out the tyres of a nuisance neighbour would be fun