Queen rearing gone wrong again?

Beekeeping & Apiculture Forum

Help Support Beekeeping & Apiculture Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Apr 17, 2014
Messages
401
Reaction score
59
Location
Warwick
Hive Type
National
Number of Hives
15
Any help appreciated,

I found some queen cells and did an AS, tore down the queencells and put some some grafted cups in to replace the queencells I destroyed.
My first attempt at grafting failed completely 0 from 19 !!

I then put in another frame of eggs (about 14 days ago) and they drew 3 queen cells.
I left 2 and put a third into a cage in the airing cupboard.
Checked this morning and a cell in the hive has hatched.
The cell in the airing cupboard has not.

Should I try to open the cell?
I was really hoping that it would hatch.
 
Any help appreciated,

I found some queen cells and did an AS, tore down the queencells and put some some grafted cups in to replace the queencells I destroyed.
My first attempt at grafting failed completely 0 from 19 !!

I then put in another frame of eggs (about 14 days ago) and they drew 3 queen cells.
I left 2 and put a third into a cage in the airing cupboard.
Checked this morning and a cell in the hive has hatched.
The cell in the airing cupboard has not.

Should I try to open the cell?
I was really hoping that it would hatch.
Needs to be 35.5c to hatch with 50% humidity, so airing cupboard prob not adequate. Get a cheap egg incubator and use a bit of melted wax to stick cells in vertically as in a hive. Worked recently for me and with 2 queens hatched from 4 QC's. Yep, do a post mortum!
 
I think that 50% is low for the humidity, mine was set for 60 to 70%.

PH
 
Gentlemen, eggs hatch, queens emerge...

If only, the issue here is the lack of emergence.

Thanks for the advice fellas.
I have not kept the temperature right and humidity too low.
I have a few roller cages so should have stuffed them back in the hive.

I will know better next time.

And thank you Beefriendly, I will not trip over my vocabulary again, precision in all things ! :owned:
 

Latest posts

Back
Top