- Joined
- Jan 1, 2018
- Messages
- 5,070
- Reaction score
- 4,964
- Location
- Fernhurst Sussex
- Hive Type
- National
- Number of Hives
- 40 plus 23 that I maintain for clients.
Good morning all,
I have a dilemma, the double shelf with roof that is attached to the front of my house is starting to get tatty and I thought I would make a new one. This shelf is stocked from about 8am until 6pm but is often out later in the summer.
As you can understand in the winter my customers are often having to use a torch to decide which location honey the are going to buy so I thought my reincarnation should be equipped with lighting!
Now, as a civil engineer I feel confident in bodging most things using wood, brick concrete or metal but my knowledge of electronics is limited. I am capable using 240v, in fact I completely rewired my first two houses, but how different electronic bits work together is a step too far.
What I would like to do is install LEDs into the underside of the roof and top shelf, powered by a battery, recharged from a small solar panel on the roof of the unit.
The system really needs a photo cell that switches it on when it gets dark as I'm often out when it gets dark in the winter.
Would any of you electronic wizards like to recommend components I could build into my new shelf?
These are the type of components I've been looking at.
https://www.ebay.co.uk/itm/26449123...b04363bfa9a&rpp_icid=63441ffd26d75b04363bfa99
https://www.cricklewoodelectronics....f9mqOVHtt0MxugtnTv7ZFCJxX0cAksAhoCiaQQAvD_BwE
I have a dilemma, the double shelf with roof that is attached to the front of my house is starting to get tatty and I thought I would make a new one. This shelf is stocked from about 8am until 6pm but is often out later in the summer.
As you can understand in the winter my customers are often having to use a torch to decide which location honey the are going to buy so I thought my reincarnation should be equipped with lighting!
Now, as a civil engineer I feel confident in bodging most things using wood, brick concrete or metal but my knowledge of electronics is limited. I am capable using 240v, in fact I completely rewired my first two houses, but how different electronic bits work together is a step too far.
What I would like to do is install LEDs into the underside of the roof and top shelf, powered by a battery, recharged from a small solar panel on the roof of the unit.
The system really needs a photo cell that switches it on when it gets dark as I'm often out when it gets dark in the winter.
Would any of you electronic wizards like to recommend components I could build into my new shelf?
These are the type of components I've been looking at.
https://www.ebay.co.uk/itm/26449123...b04363bfa9a&rpp_icid=63441ffd26d75b04363bfa99
https://www.cricklewoodelectronics....f9mqOVHtt0MxugtnTv7ZFCJxX0cAksAhoCiaQQAvD_BwE