Shop deals on ebay

BS Honey Bees

Advertise with us

Help Support Beekeeping & Apiculture Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

6 - bore four holes in the base using a 20mm bit and prepare an offcut of OMF mesh to prevent the bees having access to the el cheapo polystyrene. Th

9 - prepare a piece of 9mm ply to separate the brood chamber from the feeder. Again, the sides should be at 76 degrees. Remember to take into accoun

8 - fit the end pieces. No need for glue or anything like that if they've been made a good fit.

7 - modify the end plates with a couple of scrap block arranged to allow the "sides" to be at an angle of 76 degrees (dimensions from the Kieler and t

6 - bore four holes in the base using a 20mm bit and prepare an offcut of OMF mesh to prevent the bees having access to the el cheapo polystyrene. Th

5 - two end plates built from 3mm ply.

4 - the internal space. Note that the grooves inside the box are irrelevant.

3 - lids off. Kieler has four TBH-style frames and a drop-in feeder to take fondant.

6 - bore four holes in the base using a 20mm bit and prepare an offcut of OMF mesh to prevent the bees having access to the el cheapo polystyrene. Th

fatshark
Jan 3, 2011

There are no comments to display.